10CL010 vs T13
A comparison of the Altera Cyclone 10 LP 10CL010 and the Efinix Trion T13 using the data from both vendors' selection guides.
Side-by-side specifications
| 10CL010 | T13 | |
|---|---|---|
| Vendor / family | Altera Cyclone 10 LP | Efinix Trion |
| Logic (LUT4-equivalent) | 10,000 | 12,828 |
| LUTs as published | 10,000 LUT4 | — LUT4 |
| Vendor logic figure | 10,000 LE | 12,828 LE |
| DSP | 23 18×18 multipliers | 24 18×18 multipliers |
| Block RAM | 0.4 Mb | 0.7 Mb |
| Large RAM | — | — |
| Max. user I/O | 176 | 195 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 60 nm | 40 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 3 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The T13 has about 28% more logic capacity (12.8K vs 10K LUT4 equivalents).
For arithmetic, the T13 has 24 18×18 multipliers against 23 18×18 multipliers on the 10CL010.
The T13 has more on-chip memory (0.7 Mb vs 0.4 Mb).
The 10CL010 is designed with Altera Quartus Prime and the T13 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: 10CL010 (Cyclone 10 LP) and T13 (Trion).