10CX150 vs LFCPNX-100
A comparison of the Altera Cyclone 10 GX 10CX150 and the Lattice CertusPro-NX LFCPNX-100 using the data from both vendors' selection guides.
Side-by-side specifications
| 10CX150 | LFCPNX-100 | |
|---|---|---|
| Vendor / family | Altera Cyclone 10 GX | Lattice CertusPro-NX |
| Logic (LUT4-equivalent) | 109,540 | 80,000 |
| LUTs as published | 54,770 ALMs | 80,000 LUT4 |
| Vendor logic figure | 150,000 LE | 96,000 LC |
| DSP | 156 variable-precision DSP blocks | 156 18×18 multipliers |
| Block RAM | 9.3 Mb | 3.7 Mb |
| Large RAM | — | 3.5 Mb |
| Max. user I/O | 284 | 305 |
| Transceivers | 12 × XCVR 12.5 Gb/s | 8 × SERDES 10.3125 Gb/s |
| Hard PCI Express | Gen2 x4 | Gen3 |
| Hard processor | None | None |
| Process | 20 nm | 28 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 5 |
| Design tool | Altera Quartus Prime | Lattice Radiant |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The 10CX150 has about 37% more logic capacity (110K vs 80K LUT4 equivalents).
They use different logic architectures: the 10CX150 is built from ALMs and the LFCPNX-100 from LUT4, so the raw LUT counts (54.8K vs 80K) are not directly comparable.
The 10CX150 has more on-chip memory (9.3 Mb vs 7.2 Mb).
Both have transceivers: 12 at up to 12.5 Gb/s on the 10CX150 and 8 at up to 10.3125 Gb/s on the LFCPNX-100.
The 10CX150 is designed with Altera Quartus Prime and the LFCPNX-100 with Lattice Radiant.
Full specifications
See the complete spec sheets with packages and grades: 10CX150 (Cyclone 10 GX) and LFCPNX-100 (CertusPro-NX).