A5D 064 vs Ti800
A comparison of the Altera Agilex 5 D-Series A5D 064 and the Efinix Titanium Ti800 using the data from both vendors' selection guides.
Side-by-side specifications
| A5D 064 | Ti800 | |
|---|---|---|
| Vendor / family | Altera Agilex 5 D-Series | Efinix Titanium |
| Logic (LUT4-equivalent) | 436,800 | 796,262 |
| LUTs as published | 218,400 ALMs | — LUT4 |
| Vendor logic figure | 644,280 LE | 796,262 LE |
| DSP | 1,840 variable-precision DSP blocks | 1,536 DSP blocks |
| Block RAM | 62.6 Mb | 47.2 Mb |
| Large RAM | — | — |
| Max. user I/O | 444 | 480 |
| Transceivers | 32 × XCVR 28 Gb/s | 24 × SERDES 25.8 Gb/s |
| Hard PCI Express | Gen4 x4, Gen4 x8 | Gen4 x8 |
| Hard processor | 4× Arm Cortex-A76 + Cortex-A55 (optional) | 4× RISC-V RV64 |
| Process | Intel 7 | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 0 | 2 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The Ti800 has about 82% more logic capacity (796K vs 437K LUT4 equivalents).
They use different logic architectures: the A5D 064 is built from ALMs and the Ti800 from LUT4, so the raw LUT counts (218K vs —) are not directly comparable.
For arithmetic, the A5D 064 has 1,840 variable-precision DSP blocks against 1,536 DSP blocks on the Ti800.
The A5D 064 has more on-chip memory (62.6 Mb vs 47.2 Mb).
Both have transceivers: 32 at up to 28 Gb/s on the A5D 064 and 24 at up to 25.8 Gb/s on the Ti800.
The A5D 064 is designed with Altera Quartus Prime and the Ti800 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: A5D 064 (Agilex 5 D-Series) and Ti800 (Titanium).