A5E 028A vs Ti140
A comparison of the Altera Agilex 5 E-Series A5E 028A and the Efinix Titanium Ti140 using the data from both vendors' selection guides.
Side-by-side specifications
| A5E 028A | Ti140 | |
|---|---|---|
| Vendor / family | Altera Agilex 5 E-Series | Efinix Titanium |
| Logic (LUT4-equivalent) | 191,360 | 142,300 |
| LUTs as published | 95,680 ALMs | — LUT4 |
| Vendor logic figure | 282,256 LE | 142,300 LE |
| DSP | 376 variable-precision DSP blocks | 510 DSP blocks |
| Block RAM | 14 Mb | 10.6 Mb |
| Large RAM | — | — |
| Max. user I/O | 392 | 310 |
| Transceivers | 12 × XCVR 28 Gb/s | 16 × SERDES 16 Gb/s |
| Hard PCI Express | Gen4 x4 | Gen4 x4 |
| Hard processor | 4× Arm Cortex-A76 + Cortex-A55 (optional) | 4× RISC-V RV64 |
| Process | Intel 7 | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 3 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The A5E 028A has about 34% more logic capacity (191K vs 142K LUT4 equivalents).
They use different logic architectures: the A5E 028A is built from ALMs and the Ti140 from LUT4, so the raw LUT counts (95.7K vs —) are not directly comparable.
For arithmetic, the Ti140 has 510 DSP blocks against 376 variable-precision DSP blocks on the A5E 028A.
The A5E 028A has more on-chip memory (14 Mb vs 10.6 Mb).
Both have transceivers: 12 at up to 28 Gb/s on the A5E 028A and 16 at up to 16 Gb/s on the Ti140.
The A5E 028A is designed with Altera Quartus Prime and the Ti140 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: A5E 028A (Agilex 5 E-Series) and Ti140 (Titanium).