FPGA & adaptive SoC databook · online editionRev. 2026.10

A5E 065A vs Ti660

A comparison of the Altera Agilex 5 E-Series A5E 065A and the Efinix Titanium Ti660 using the data from both vendors' selection guides.

Side-by-side specifications

A5E 065ATi660
Vendor / familyAltera Agilex 5 E-SeriesEfinix Titanium
Logic (LUT4-equivalent)444,800656,916
LUTs as published222,400 ALMs— LUT4
Vendor logic figure656,080 LE656,916 LE
DSP846 variable-precision DSP blocks1,260 DSP blocks
Block RAM31.5 Mb38.9 Mb
Large RAM——
Max. user I/O504480
Transceivers24 × XCVR 28 Gb/s24 × SERDES 25.8 Gb/s
Hard PCI ExpressGen4 x4Gen4 x8
Hard processor4× Arm Cortex-A76 + Cortex-A55 (optional)4× RISC-V RV64
ProcessIntel 716 nm
Configuration memorySRAMSRAM
Packages22
Design toolAltera Quartus PrimeEfinix Efinity

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The Ti660 has about 48% more logic capacity (657K vs 445K LUT4 equivalents).

They use different logic architectures: the A5E 065A is built from ALMs and the Ti660 from LUT4, so the raw LUT counts (222K vs —) are not directly comparable.

For arithmetic, the Ti660 has 1,260 DSP blocks against 846 variable-precision DSP blocks on the A5E 065A.

The Ti660 has more on-chip memory (38.9 Mb vs 31.5 Mb).

Both have transceivers: 24 at up to 28 Gb/s on the A5E 065A and 24 at up to 25.8 Gb/s on the Ti660.

The A5E 065A is designed with Altera Quartus Prime and the Ti660 with Efinix Efinity.

Full specifications

See the complete spec sheets with packages and grades: A5E 065A (Agilex 5 E-Series) and Ti660 (Titanium).