AGF 008 vs XCZU11EG
A comparison of the Altera Agilex 7 F-Series AGF 008 and the AMD Zynq UltraScale+ MPSoC XCZU11EG using the data from both vendors' selection guides.
Side-by-side specifications
| AGF 008 | XCZU11EG | |
|---|---|---|
| Vendor / family | Altera Agilex 7 F-Series | AMD Zynq UltraScale+ MPSoC |
| Logic (LUT4-equivalent) | 518,400 | 478,400 |
| LUTs as published | 259,200 ALMs | 299,000 LUT6 |
| Vendor logic figure | 764,640 LE | 653,000 SLC |
| DSP | 2,296 variable-precision DSP blocks | 2,928 DSP slices |
| Block RAM | 74 Mb | 21.1 Mb |
| Large RAM | — | 22.5 Mb |
| Max. user I/O | 576 | 512 |
| Transceivers | 32 × XCVR 58 Gb/s | 32 × GTH 16.3 Gb/s, 16 × GTY 32.75 Gb/s |
| Hard PCI Express | None | Gen3 x16, Gen3 x8 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 |
| Process | Intel 7 | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 4 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The AGF 008 has about 8% more logic capacity (518K vs 478K LUT4 equivalents).
They use different logic architectures: the AGF 008 is built from ALMs and the XCZU11EG from LUT6, so the raw LUT counts (259K vs 299K) are not directly comparable.
For arithmetic, the XCZU11EG has 2,928 DSP slices against 2,296 variable-precision DSP blocks on the AGF 008.
The AGF 008 has more on-chip memory (74 Mb vs 43.6 Mb).
Both have transceivers: 32 at up to 58 Gb/s on the AGF 008 and 48 at up to 32.75 Gb/s on the XCZU11EG.
The AGF 008 is designed with Altera Quartus Prime and the XCZU11EG with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: AGF 008 (Agilex 7 F-Series) and XCZU11EG (Zynq UltraScale+ MPSoC).