AGF 008 vs XCZU15EG
A comparison of the Altera Agilex 7 F-Series AGF 008 and the AMD Zynq UltraScale+ MPSoC XCZU15EG using the data from both vendors' selection guides.
Side-by-side specifications
| AGF 008 | XCZU15EG | |
|---|---|---|
| Vendor / family | Altera Agilex 7 F-Series | AMD Zynq UltraScale+ MPSoC |
| Logic (LUT4-equivalent) | 518,400 | 545,600 |
| LUTs as published | 259,200 ALMs | 341,000 LUT6 |
| Vendor logic figure | 764,640 LE | 747,000 SLC |
| DSP | 2,296 variable-precision DSP blocks | 3,528 DSP slices |
| Block RAM | 74 Mb | 26.2 Mb |
| Large RAM | — | 31.5 Mb |
| Max. user I/O | 576 | 328 |
| Transceivers | 32 × XCVR 58 Gb/s | 24 × GTH 16.3 Gb/s |
| Hard PCI Express | None | None |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 |
| Process | Intel 7 | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
Both devices offer similar logic capacity: 518K and 546K LUT4 equivalents.
They use different logic architectures: the AGF 008 is built from ALMs and the XCZU15EG from LUT6, so the raw LUT counts (259K vs 341K) are not directly comparable.
For arithmetic, the XCZU15EG has 3,528 DSP slices against 2,296 variable-precision DSP blocks on the AGF 008.
The AGF 008 has more on-chip memory (74 Mb vs 57.7 Mb).
Both have transceivers: 32 at up to 58 Gb/s on the AGF 008 and 24 at up to 16.3 Gb/s on the XCZU15EG.
The AGF 008 is designed with Altera Quartus Prime and the XCZU15EG with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: AGF 008 (Agilex 7 F-Series) and XCZU15EG (Zynq UltraScale+ MPSoC).