AGF 008 vs XCZU17EG
A comparison of the Altera Agilex 7 F-Series AGF 008 and the AMD Zynq UltraScale+ MPSoC XCZU17EG using the data from both vendors' selection guides.
Side-by-side specifications
| AGF 008 | XCZU17EG | |
|---|---|---|
| Vendor / family | Altera Agilex 7 F-Series | AMD Zynq UltraScale+ MPSoC |
| Logic (LUT4-equivalent) | 518,400 | 676,800 |
| LUTs as published | 259,200 ALMs | 423,000 LUT6 |
| Vendor logic figure | 764,640 LE | 926,000 SLC |
| DSP | 2,296 variable-precision DSP blocks | 1,590 DSP slices |
| Block RAM | 74 Mb | 28 Mb |
| Large RAM | — | 28.7 Mb |
| Max. user I/O | 576 | 668 |
| Transceivers | 32 × XCVR 58 Gb/s | 44 × GTH 16.3 Gb/s, 28 × GTY 32.75 Gb/s |
| Hard PCI Express | None | Gen3 x16 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 |
| Process | Intel 7 | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 4 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The XCZU17EG has about 31% more logic capacity (677K vs 518K LUT4 equivalents).
They use different logic architectures: the AGF 008 is built from ALMs and the XCZU17EG from LUT6, so the raw LUT counts (259K vs 423K) are not directly comparable.
For arithmetic, the AGF 008 has 2,296 variable-precision DSP blocks against 1,590 DSP slices on the XCZU17EG.
The AGF 008 has more on-chip memory (74 Mb vs 56.7 Mb).
Both have transceivers: 32 at up to 58 Gb/s on the AGF 008 and 72 at up to 32.75 Gb/s on the XCZU17EG.
The AGF 008 is designed with Altera Quartus Prime and the XCZU17EG with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: AGF 008 (Agilex 7 F-Series) and XCZU17EG (Zynq UltraScale+ MPSoC).