AGF 012 vs SX 1100
A comparison of the Altera Agilex 7 F-Series AGF 012 and the Altera Stratix 10 GX/SX SX 1100 using the data from both vendors' selection guides.
Side-by-side specifications
| AGF 012 | SX 1100 | |
|---|---|---|
| Vendor / family | Altera Agilex 7 F-Series | Altera Stratix 10 GX/SX |
| Logic (LUT4-equivalent) | 799,000 | 898,560 |
| LUTs as published | 399,500 ALMs | 449,280 ALMs |
| Vendor logic figure | 1,178,525 LE | 1,325,000 LE |
| DSP | 3,743 variable-precision DSP blocks | 2,592 variable-precision DSP blocks |
| Block RAM | 115 Mb | 107 Mb |
| Large RAM | — | — |
| Max. user I/O | 768 | 688 |
| Transceivers | 32 × XCVR 58 Gb/s | 32 × XCVR 28.3 Gb/s, 16 × XCVR 17.4 Gb/s |
| Hard PCI Express | None | Gen3 x16 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 |
| Process | Intel 7 | 14 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 1 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The SX 1100 has about 12% more logic capacity (899K vs 799K LUT4 equivalents).
For arithmetic, the AGF 012 has 3,743 variable-precision DSP blocks against 2,592 variable-precision DSP blocks on the SX 1100.
Both have transceivers: 32 at up to 58 Gb/s on the AGF 012 and 48 at up to 28.3 Gb/s on the SX 1100.
The AGF 012 is designed with Altera Quartus Prime and the SX 1100 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: AGF 012 (Agilex 7 F-Series) and SX 1100 (Stratix 10 GX/SX).