GW1AN-1 vs LCMXO3LF-1300
A comparison of the Gowin Arora GW1AN-1 and the Lattice MachXO3 LCMXO3LF-1300 using the data from both vendors' selection guides.
Side-by-side specifications
| GW1AN-1 | LCMXO3LF-1300 | |
|---|---|---|
| Vendor / family | Gowin Arora | Lattice MachXO3 |
| Logic (LUT4-equivalent) | 1,152 | 1,300 |
| LUTs as published | 1,152 LUT4 | 1,300 LUT4 |
| Vendor logic figure | — LC | — LC |
| DSP | — 18×18 multipliers | — 18×18 multipliers |
| Block RAM | 0.1 Mb | 0.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 120 | 206 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 55 nm | — |
| Configuration memory | Embedded flash | — |
| Packages | 1 | 6 |
| Design tool | Gowin EDA | Lattice Diamond |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The LCMXO3LF-1300 has about 13% more logic capacity (1.3K vs 1.2K LUT4 equivalents).
The GW1AN-1 has more on-chip memory (0.1 Mb vs 0.1 Mb).
Configuration memory: embedded flash on the GW1AN-1, — on the LCMXO3LF-1300.
The GW1AN-1 is designed with Gowin EDA and the LCMXO3LF-1300 with Lattice Diamond.
Full specifications
See the complete spec sheets with packages and grades: GW1AN-1 (Arora) and LCMXO3LF-1300 (MachXO3).