GW1AN-1S vs iCE40LP640
A comparison of the Gowin Arora GW1AN-1S and the Lattice iCE40 LP/HX/LM iCE40LP640 using the data from both vendors' selection guides.
Side-by-side specifications
| GW1AN-1S | iCE40LP640 | |
|---|---|---|
| Vendor / family | Gowin Arora | Lattice iCE40 LP/HX/LM |
| Logic (LUT4-equivalent) | 1,152 | 640 |
| LUTs as published | 1,152 LUT4 | 640 LUT4 |
| Vendor logic figure | — LC | 640 LC |
| DSP | — 18×18 multipliers | — 16×16 MAC blocks |
| Block RAM | 0.1 Mb | 0 Mb |
| Large RAM | — | — |
| Max. user I/O | 44 | 10 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 55 nm | 40 nm |
| Configuration memory | Embedded flash | NVCM or SRAM |
| Packages | 2 | 1 |
| Design tool | Gowin EDA | Lattice iCEcube2 |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The GW1AN-1S has about 80% more logic capacity (1.2K vs 640 LUT4 equivalents).
The GW1AN-1S has more on-chip memory (0.1 Mb vs 0 Mb).
Configuration memory: embedded flash on the GW1AN-1S, nvcm or sram on the iCE40LP640.
The GW1AN-1S is designed with Gowin EDA and the iCE40LP640 with Lattice iCEcube2.
Full specifications
See the complete spec sheets with packages and grades: GW1AN-1S (Arora) and iCE40LP640 (iCE40 LP/HX/LM).