GW5AR-25 vs T20
A comparison of the Gowin Arora V GW5AR-25 and the Efinix Trion T20 using the data from both vendors' selection guides.
Side-by-side specifications
| GW5AR-25 | T20 | |
|---|---|---|
| Vendor / family | Gowin Arora V | Efinix Trion |
| Logic (LUT4-equivalent) | 23,040 | 19,728 |
| LUTs as published | 23,040 LUT4 | — LUT4 |
| Vendor logic figure | — LC | 19,728 LE |
| DSP | 28 27×18 DSP blocks | 36 18×18 multipliers |
| Block RAM | 1 Mb | 1 Mb |
| Large RAM | — | — |
| Max. user I/O | 239 | 230 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 22 nm | 40 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 7 |
| Design tool | Gowin EDA | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The GW5AR-25 has about 17% more logic capacity (23K vs 19.7K LUT4 equivalents).
For arithmetic, the T20 has 36 18×18 multipliers against 28 27×18 DSP blocks on the GW5AR-25.
The GW5AR-25 is designed with Gowin EDA and the T20 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: GW5AR-25 (Arora V) and T20 (Trion).