GX 2800 vs XCVU45P
A comparison of the Altera Stratix 10 GX/SX GX 2800 and the AMD Virtex UltraScale+ HBM XCVU45P using the data from both vendors' selection guides.
Side-by-side specifications
| GX 2800 | XCVU45P | |
|---|---|---|
| Vendor / family | Altera Stratix 10 GX/SX | AMD Virtex UltraScale+ HBM |
| Logic (LUT4-equivalent) | 1,866,240 | 1,395,200 |
| LUTs as published | 933,120 ALMs | 872,000 LUT6 |
| Vendor logic figure | 2,753,000 LE | 1,907,000 SLC |
| DSP | 5,760 variable-precision DSP blocks | 5,952 DSP slices |
| Block RAM | 229 Mb | 47.3 Mb |
| Large RAM | — | 180 Mb |
| Max. user I/O | 1,160 | 416 |
| Transceivers | 64 × XCVR 28.3 Gb/s, 32 × XCVR 17.4 Gb/s | 64 × GTY 32.75 Gb/s |
| Hard PCI Express | Gen3 x16 | Gen3 x16, Gen3 x16 |
| Hard processor | None | None |
| Process | 14 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 4 | 0 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The GX 2800 has about 34% more logic capacity (1866K vs 1395K LUT4 equivalents).
They use different logic architectures: the GX 2800 is built from ALMs and the XCVU45P from LUT6, so the raw LUT counts (933K vs 872K) are not directly comparable.
For arithmetic, the XCVU45P has 5,952 DSP slices against 5,760 variable-precision DSP blocks on the GX 2800.
Both have transceivers: 96 at up to 28.3 Gb/s on the GX 2800 and 64 at up to 32.75 Gb/s on the XCVU45P.
The GX 2800 is designed with Altera Quartus Prime and the XCVU45P with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: GX 2800 (Stratix 10 GX/SX) and XCVU45P (Virtex UltraScale+ HBM).