LAV-AT-E30 vs Ti120
A comparison of the Lattice Avant-E LAV-AT-E30 and the Efinix Titanium Ti120 using the data from both vendors' selection guides.
Side-by-side specifications
| LAV-AT-E30 | Ti120 | |
|---|---|---|
| Vendor / family | Lattice Avant-E | Efinix Titanium |
| Logic (LUT4-equivalent) | 163,000 | 120,960 |
| LUTs as published | 163,000 LUT4 | 120,960 LUT4 |
| Vendor logic figure | 262,000 LC | 123,379 LE |
| DSP | 700 18×18 multipliers | 448 DSP blocks |
| Block RAM | 14.4 Mb | 9.2 Mb |
| Large RAM | — | — |
| Max. user I/O | 349 | 284 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 16 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 4 |
| Design tool | Lattice Radiant | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The LAV-AT-E30 has about 35% more logic capacity (163K vs 121K LUT4 equivalents).
For arithmetic, the LAV-AT-E30 has 700 18×18 multipliers against 448 DSP blocks on the Ti120.
The LAV-AT-E30 has more on-chip memory (14.4 Mb vs 9.2 Mb).
The LAV-AT-E30 is designed with Lattice Radiant and the Ti120 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: LAV-AT-E30 (Avant-E) and Ti120 (Titanium).