LAV-AT-E70 vs Ti180
A comparison of the Lattice Avant-E LAV-AT-E70 and the Efinix Titanium Ti180 using the data from both vendors' selection guides.
Side-by-side specifications
| LAV-AT-E70 | Ti180 | |
|---|---|---|
| Vendor / family | Lattice Avant-E | Efinix Titanium |
| Logic (LUT4-equivalent) | 397,000 | 172,800 |
| LUTs as published | 397,000 LUT4 | 172,800 LUT4 |
| Vendor logic figure | 637,000 LC | 176,256 LE |
| DSP | 1,800 18×18 multipliers | 640 DSP blocks |
| Block RAM | 35.6 Mb | 13.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 553 | 284 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 16 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 4 | 5 |
| Design tool | Lattice Radiant | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The LAV-AT-E70 has about 130% more logic capacity (397K vs 173K LUT4 equivalents).
For arithmetic, the LAV-AT-E70 has 1,800 18×18 multipliers against 640 DSP blocks on the Ti180.
The LAV-AT-E70 has more on-chip memory (35.6 Mb vs 13.1 Mb).
The LAV-AT-E70 is designed with Lattice Radiant and the Ti180 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: LAV-AT-E70 (Avant-E) and Ti180 (Titanium).