FPGA & adaptive SoC databook · online editionRev. 2026.10

MPFS250T vs XC7Z035

A comparison of the Microchip PolarFire SoC MPFS250T and the AMD Zynq 7000 XC7Z035 using the data from both vendors' selection guides.

Side-by-side specifications

MPFS250TXC7Z035
Vendor / familyMicrochip PolarFire SoCAMD Zynq 7000
Logic (LUT4-equivalent)254,000275,040
LUTs as published254,000 LUT4171,900 LUT6
Vendor logic figure254,000 LE275,000 LC
DSP784 18×18 math blocks (MACC)900 DSP slices
Block RAM15.9 Mb17.6 Mb
Large RAM——
Max. user I/O372362
Transceivers16 × SERDES 12.5 Gb/s16 × GTX 12.5 Gb/s
Hard PCI ExpressGen2 x4Gen2 x8
Hard processor4× RISC-V (RV64GC U54)2× Arm Cortex-A9
Process28 nm28 nm
Configuration memoryNon-volatile (SONOS flash)SRAM
Packages43
Design toolMicrochip Libero SoCAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The XC7Z035 has about 8% more logic capacity (275K vs 254K LUT4 equivalents).

They use different logic architectures: the MPFS250T is built from LUT4 and the XC7Z035 from LUT6, so the raw LUT counts (254K vs 172K) are not directly comparable.

For arithmetic, the XC7Z035 has 900 DSP slices against 784 18×18 math blocks (MACC) on the MPFS250T.

Configuration memory: non-volatile (sonos flash) on the MPFS250T, sram on the XC7Z035.

The MPFS250T is designed with Microchip Libero SoC and the XC7Z035 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: MPFS250T (PolarFire SoC) and XC7Z035 (Zynq 7000).