FPGA & adaptive SoC databook · online editionRev. 2026.10

SX 850 vs XCZU11EG

A comparison of the Altera Stratix 10 GX/SX SX 850 and the AMD Zynq UltraScale+ MPSoC XCZU11EG using the data from both vendors' selection guides.

Side-by-side specifications

SX 850XCZU11EG
Vendor / familyAltera Stratix 10 GX/SXAMD Zynq UltraScale+ MPSoC
Logic (LUT4-equivalent)569,920478,400
LUTs as published284,960 ALMs299,000 LUT6
Vendor logic figure841,000 LE653,000 SLC
DSP2,016 variable-precision DSP blocks2,928 DSP slices
Block RAM68 Mb21.1 Mb
Large RAM—22.5 Mb
Max. user I/O688512
Transceivers32 × XCVR 28.3 Gb/s, 16 × XCVR 17.4 Gb/s32 × GTH 16.3 Gb/s, 16 × GTY 32.75 Gb/s
Hard PCI ExpressGen3 x16Gen3 x16, Gen3 x8
Hard processor4× Arm Cortex-A534× Arm Cortex-A53
Process14 nm16 nm
Configuration memorySRAMSRAM
Packages14
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The SX 850 has about 19% more logic capacity (570K vs 478K LUT4 equivalents).

They use different logic architectures: the SX 850 is built from ALMs and the XCZU11EG from LUT6, so the raw LUT counts (285K vs 299K) are not directly comparable.

For arithmetic, the XCZU11EG has 2,928 DSP slices against 2,016 variable-precision DSP blocks on the SX 850.

The SX 850 has more on-chip memory (68 Mb vs 43.6 Mb).

Both have transceivers: 48 at up to 28.3 Gb/s on the SX 850 and 48 at up to 32.75 Gb/s on the XCZU11EG.

The SX 850 is designed with Altera Quartus Prime and the XCZU11EG with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: SX 850 (Stratix 10 GX/SX) and XCZU11EG (Zynq UltraScale+ MPSoC).