FPGA & adaptive SoC databook · online editionRev. 2026.10

Ti1250 vs XCVC1802

A comparison of the Efinix Titanium Ti1250 and the AMD Versal AI Core XCVC1802 using the data from both vendors' selection guides.

Side-by-side specifications

Ti1250XCVC1802
Vendor / familyEfinix TitaniumAMD Versal AI Core
Logic (LUT4-equivalent)1,233,0201,160,000
LUTs as published— LUT4725,000 LUT6
Vendor logic figure1,233,020 LE1,586,000 SLC
DSP2,380 DSP blocks1,600 DSP Engines
Block RAM73.1 Mb28 Mb
Large RAM—91 Mb
Max. user I/O480692
Transceivers40 × SERDES 25.8 Gb/s44 × GTY 32.75 Gb/s
Hard PCI ExpressGen4 x8Gen4 x16
Hard processor4× RISC-V RV642× Arm Cortex-A72
Process16 nm7 nm
Configuration memorySRAMSRAM
Packages23
Design toolEfinix EfinityAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

Both devices offer similar logic capacity: 1233K and 1160K LUT4 equivalents.

They use different logic architectures: the Ti1250 is built from LUT4 and the XCVC1802 from LUT6, so the raw LUT counts (— vs 725K) are not directly comparable.

For arithmetic, the Ti1250 has 2,380 DSP blocks against 1,600 DSP Engines on the XCVC1802.

The XCVC1802 has more on-chip memory (119 Mb vs 73.1 Mb).

Both have transceivers: 40 at up to 25.8 Gb/s on the Ti1250 and 44 at up to 32.75 Gb/s on the XCVC1802.

The Ti1250 is designed with Efinix Efinity and the XCVC1802 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: Ti1250 (Titanium) and XCVC1802 (Versal AI Core).