FPGA & adaptive SoC databook · online editionRev. 2026.10

Ti375 vs XCZU9EG

A comparison of the Efinix Titanium Ti375 and the AMD Zynq UltraScale+ MPSoC XCZU9EG using the data from both vendors' selection guides.

Side-by-side specifications

Ti375XCZU9EG
Vendor / familyEfinix TitaniumAMD Zynq UltraScale+ MPSoC
Logic (LUT4-equivalent)362,880438,400
LUTs as published362,880 LUT4274,000 LUT6
Vendor logic figure370,137 LE600,000 SLC
DSP1,344 DSP blocks2,520 DSP slices
Block RAM27.5 Mb32.1 Mb
Large RAM——
Max. user I/O337328
Transceivers16 × SERDES 16 Gb/s24 × GTH 16.3 Gb/s
Hard PCI ExpressGen4 x4None
Hard processor4× RISC-V RV324× Arm Cortex-A53
Process16 nm16 nm
Configuration memorySRAMSRAM
Packages52
Design toolEfinix EfinityAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The XCZU9EG has about 21% more logic capacity (438K vs 363K LUT4 equivalents).

They use different logic architectures: the Ti375 is built from LUT4 and the XCZU9EG from LUT6, so the raw LUT counts (363K vs 274K) are not directly comparable.

For arithmetic, the XCZU9EG has 2,520 DSP slices against 1,344 DSP blocks on the Ti375.

The XCZU9EG has more on-chip memory (32.1 Mb vs 27.5 Mb).

Both have transceivers: 16 at up to 16 Gb/s on the Ti375 and 24 at up to 16.3 Gb/s on the XCZU9EG.

The Ti375 is designed with Efinix Efinity and the XCZU9EG with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: Ti375 (Titanium) and XCZU9EG (Zynq UltraScale+ MPSoC).