FPGA & adaptive SoC databook · online editionRev. 2026.10

Tz200 vs XCZU4EG

A comparison of the Efinix Topaz Tz200 and the AMD Zynq UltraScale+ MPSoC XCZU4EG using the data from both vendors' selection guides.

Side-by-side specifications

Tz200XCZU4EG
Vendor / familyEfinix TopazAMD Zynq UltraScale+ MPSoC
Logic (LUT4-equivalent)230,332140,800
LUTs as published230,332 LUT488,000 LUT6
Vendor logic figure215,360 LE192,000 SLC
DSP840 DSP blocks728 DSP slices
Block RAM15.8 Mb4.5 Mb
Large RAM—13.5 Mb
Max. user I/O227252
Transceivers16 × SERDES 12.5 Gb/s16 × GTH 16.3 Gb/s
Hard PCI ExpressGen3 x4Gen3 x8
Hard processor4× RISC-V4× Arm Cortex-A53
Process16 nm16 nm
Configuration memorySRAMSRAM
Packages43
Design toolEfinix EfinityAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The Tz200 has about 64% more logic capacity (230K vs 141K LUT4 equivalents).

They use different logic architectures: the Tz200 is built from LUT4 and the XCZU4EG from LUT6, so the raw LUT counts (230K vs 88K) are not directly comparable.

For arithmetic, the Tz200 has 840 DSP blocks against 728 DSP slices on the XCZU4EG.

The XCZU4EG has more on-chip memory (18 Mb vs 15.8 Mb).

Both have transceivers: 16 at up to 12.5 Gb/s on the Tz200 and 16 at up to 16.3 Gb/s on the XCZU4EG.

The Tz200 is designed with Efinix Efinity and the XCZU4EG with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: Tz200 (Topaz) and XCZU4EG (Zynq UltraScale+ MPSoC).