10CL010 vs 10M08
A comparison of the Altera Cyclone 10 LP 10CL010 and the Altera MAX 10 10M08 using the data from both vendors' selection guides.
Side-by-side specifications
| 10CL010 | 10M08 | |
|---|---|---|
| Vendor / family | Altera Cyclone 10 LP | Altera MAX 10 |
| Logic (LUT4-equivalent) | 10,000 | 8,000 |
| LUTs as published | 10,000 LUT4 | 8,000 LUT4 |
| Vendor logic figure | 10,000 LE | 8,000 LE |
| DSP | 23 18×18 multipliers | 24 18×18 multipliers |
| Block RAM | 0.4 Mb | 0.4 Mb |
| Large RAM | — | — |
| Max. user I/O | 176 | 250 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 60 nm | 55 nm |
| Configuration memory | SRAM | Internal flash |
| Packages | 3 | 7 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The 10CL010 has about 25% more logic capacity (10K vs 8K LUT4 equivalents).
For arithmetic, the 10M08 has 24 18×18 multipliers against 23 18×18 multipliers on the 10CL010.
Configuration memory: sram on the 10CL010, internal flash on the 10M08.
The 10CL010 is designed with Altera Quartus Prime and the 10M08 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: 10CL010 (Cyclone 10 LP) and 10M08 (MAX 10).