10M08
AlteraMAX 10The 10M08 is a MAX 10 FPGA from Altera, built on a 55 nm process. It provides 8,000 LUT4 look-up tables, 0.4 Mb of block RAM and 24 18×18 multipliers. It offers up to 250 user I/O pins. It is available in 7 packages, from the V81 (4 × 4 mm) to the F484 (23 × 23 mm). Designs are built with Altera Quartus Prime.
Specifications
| Vendor | Altera |
|---|---|
| Family | MAX 10 |
| Series | MAX |
| Process | 55 nm |
| Configuration memory | Internal flash |
| LUT4-equivalent capacity | 8,000 |
| Look-up tables (LUT4) | 8,000 |
| Logic elements (LEs) | 8,000 |
| Block RAM | 0.4 Mb |
| DSP (18×18 multiplier) | 24 |
| Max. user I/O | 250 |
|---|---|
| Transceivers | None |
| PCI Express | None |
| Analog / monitor | ADC |
| Design tool | Altera Quartus Prime |
Packages
| Package | Size (mm) | Pitch (mm) | User I/O | Transceivers |
|---|---|---|---|---|
| V81 | 4 × 4 | 0.4 | 58 | — |
| E144 | 22 × 22 | 0.5 | 101 | — |
| M153 | 8 × 8 | 0.5 | 112 | — |
| U169 | 11 × 11 | 0.8 | 130 | — |
| U324 | 15 × 15 | 0.8 | 246 | — |
| F256 | 17 × 17 | 1.0 | 178 | — |
| F484 | 23 × 23 | 1.0 | 250 | — |
Package names are shown as in the selection guide; the full ordering code adds speed grade and temperature (see the data sheet).
Alternatives to the 10M08
Closest matches in other families and vendors by logic, DSP, memory, I/O and transceivers. Check pin compatibility and tools before migrating.
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| GW1N-9Gowin LittleBee | 8.6K 8.6K LUT4 | — | 20 | 0.5 Mb | 276 | — | — |
| GW1NR-9Gowin LittleBee | 8.6K 8.6K LUT4 | — | 20 | 0.5 Mb | 276 | — | — |
| EP4CE10Altera Cyclone IV | 10K 10K LUT4 | 10K LE | 23 | 0.4 Mb | 179 | — | — |
| 10CL010Altera Cyclone 10 LP | 10K 10K LUT4 | 10K LE | 23 | 0.4 Mb | 176 | — | — |
| LFE5U-12Lattice ECP5 | 12K 12K LUT4 | — | 28 | 0.6 Mb | 197 | — | — |
| T13Efinix Trion | ≈12.8K 12.8K LEs | 12.8K LE | 24 | 0.7 Mb | 195 | — | — |
Compare side by side: 10M08 vs GW1N-9, 10M08 vs GW1NR-9, 10M08 vs EP4CE10, 10M08 vs 10CL010.
10M08 quick facts
How many LUTs does the 10M08 have?
The 10M08 has 8,000 LUT4 look-up tables, about 8,000 LUT4 equivalents.
How many DSP blocks does the 10M08 have?
The 10M08 has 24 18×18 multipliers and 0.4 Mb of block RAM.
Does the 10M08 have transceivers?
No, the 10M08 has no multi-gigabit transceivers. Its user I/O supports up to 250 pins.
What are the alternatives to the 10M08?
Devices of similar size in other families include GW1N-9 (Gowin LittleBee), GW1NR-9 (Gowin LittleBee), EP4CE10 (Altera Cyclone IV).
Which software is used to design with the 10M08?
Designs for the 10M08 are built with Altera Quartus Prime.
Other MAX 10 devices
| Device | LUT4-eq. | Vendor logic | DSP | Block RAM | Max I/O | Transceivers | PCIe |
|---|---|---|---|---|---|---|---|
| 10M02 | 2K 2K LUT4 | 2K LE | 16 | 0.1 Mb | 246 | — | — |
| 10M04 | 4K 4K LUT4 | 4K LE | 20 | 0.2 Mb | 246 | — | — |
| 10M08 | 8K 8K LUT4 | 8K LE | 24 | 0.4 Mb | 250 | — | — |
| 10M16 | 16K 16K LUT4 | 16K LE | 45 | 0.5 Mb | 320 | — | — |
| 10M25 | 25K 25K LUT4 | 25K LE | 55 | 0.7 Mb | 360 | — | — |
| 10M40 | 40K 40K LUT4 | 40K LE | 125 | 1.2 Mb | 500 | — | — |
| 10M50 | 50K 50K LUT4 | 50K LE | 144 | 1.6 Mb | 500 | — | — |
Source: Altera MAX 10 FPGA Product Table, 2025.09.23. Data is extracted automatically from the vendor's selection guide; verify critical values in the device data sheet.