5CEA5 vs Ti70
A comparison of the Altera Cyclone V 5CEA5 and the Efinix Titanium Ti70 using the data from both vendors' selection guides.
Side-by-side specifications
| 5CEA5 | Ti70 | |
|---|---|---|
| Vendor / family | Altera Cyclone V | Efinix Titanium |
| Logic (LUT4-equivalent) | 58,160 | 68,218 |
| LUTs as published | 29,080 ALMs | — LUT4 |
| Vendor logic figure | 77,000 LE | 68,218 LE |
| DSP | 150 variable-precision DSP blocks | 160 DSP blocks |
| Block RAM | 4.4 Mb | 2.6 Mb |
| Large RAM | — | — |
| Max. user I/O | 240 | 183 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 28 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 3 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The Ti70 has about 17% more logic capacity (68.2K vs 58.2K LUT4 equivalents).
They use different logic architectures: the 5CEA5 is built from ALMs and the Ti70 from LUT4, so the raw LUT counts (29.1K vs —) are not directly comparable.
For arithmetic, the Ti70 has 160 DSP blocks against 150 variable-precision DSP blocks on the 5CEA5.
The 5CEA5 has more on-chip memory (4.4 Mb vs 2.6 Mb).
The 5CEA5 is designed with Altera Quartus Prime and the Ti70 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: 5CEA5 (Cyclone V) and Ti70 (Titanium).