5CGTD5 vs XCSU65P
A comparison of the Altera Cyclone V 5CGTD5 and the AMD Spartan UltraScale+ XCSU65P using the data from both vendors' selection guides.
Side-by-side specifications
| 5CGTD5 | XCSU65P | |
|---|---|---|
| Vendor / family | Altera Cyclone V | AMD Spartan UltraScale+ |
| Logic (LUT4-equivalent) | 58,160 | 48,000 |
| LUTs as published | 29,080 ALMs | 30,000 LUT6 |
| Vendor logic figure | 77,000 LE | 66,000 SLC |
| DSP | 150 variable-precision DSP blocks | 144 DSP slices |
| Block RAM | 4.4 Mb | 3.8 Mb |
| Large RAM | — | — |
| Max. user I/O | 336 | 478 |
| Transceivers | 6 × XCVR 6.144 Gb/s | 4 × GTH 16.3 Gb/s |
| Hard PCI Express | Gen2 | Gen4 x4 |
| Hard processor | None | None |
| Process | 28 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 5 | 5 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The 5CGTD5 has about 21% more logic capacity (58.2K vs 48K LUT4 equivalents).
They use different logic architectures: the 5CGTD5 is built from ALMs and the XCSU65P from LUT6, so the raw LUT counts (29.1K vs 30K) are not directly comparable.
For arithmetic, the 5CGTD5 has 150 variable-precision DSP blocks against 144 DSP slices on the XCSU65P.
The 5CGTD5 has more on-chip memory (4.4 Mb vs 3.8 Mb).
Both have transceivers: 6 at up to 6.144 Gb/s on the 5CGTD5 and 4 at up to 16.3 Gb/s on the XCSU65P.
The 5CGTD5 is designed with Altera Quartus Prime and the XCSU65P with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: 5CGTD5 (Cyclone V) and XCSU65P (Spartan UltraScale+).