AGF 014 vs Ti2000
A comparison of the Altera Agilex 7 F-Series AGF 014 and the Efinix Titanium Ti2000 using the data from both vendors' selection guides.
Side-by-side specifications
| AGF 014 | Ti2000 | |
|---|---|---|
| Vendor / family | Altera Agilex 7 F-Series | Efinix Titanium |
| Logic (LUT4-equivalent) | 974,400 | 1,974,067 |
| LUTs as published | 487,200 ALMs | — LUT4 |
| Vendor logic figure | 1,437,240 LE | 1,974,067 LE |
| DSP | 4,510 variable-precision DSP blocks | 3,808 DSP blocks |
| Block RAM | 139 Mb | 117 Mb |
| Large RAM | — | — |
| Max. user I/O | 768 | 480 |
| Transceivers | 32 × XCVR 58 Gb/s | 40 × SERDES 25.8 Gb/s |
| Hard PCI Express | None | Gen4 x8 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× RISC-V RV64 |
| Process | Intel 7 | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The Ti2000 has about 103% more logic capacity (1974K vs 974K LUT4 equivalents).
They use different logic architectures: the AGF 014 is built from ALMs and the Ti2000 from LUT4, so the raw LUT counts (487K vs —) are not directly comparable.
For arithmetic, the AGF 014 has 4,510 variable-precision DSP blocks against 3,808 DSP blocks on the Ti2000.
The AGF 014 has more on-chip memory (139 Mb vs 117 Mb).
Both have transceivers: 32 at up to 58 Gb/s on the AGF 014 and 40 at up to 25.8 Gb/s on the Ti2000.
The AGF 014 is designed with Altera Quartus Prime and the Ti2000 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: AGF 014 (Agilex 7 F-Series) and Ti2000 (Titanium).