AGI 041 vs GW2AN-55
A comparison of the Altera Agilex 7 I-Series AGI 041 and the Gowin Arora II GW2AN-55 using the data from both vendors' selection guides.
Side-by-side specifications
| AGI 041 | GW2AN-55 | |
|---|---|---|
| Vendor / family | Altera Agilex 7 I-Series | Gowin Arora II |
| Logic (LUT4-equivalent) | 2,712,320 | 54,720 |
| LUTs as published | 1,356,160 ALMs | 54,720 LUT4 |
| Vendor logic figure | 4,000,672 LE | — LC |
| DSP | — variable-precision DSP blocks | — 18×18 multipliers |
| Block RAM | 335 Mb | 2.5 Mb |
| Large RAM | — | — |
| Max. user I/O | 744 | 608 |
| Transceivers | 64 × XCVR 116 Gb/s | None |
| Hard PCI Express | None | None |
| Hard processor | 4× Arm Cortex-A53 (optional) | None |
| Process | Intel 7 | 55 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 1 |
| Design tool | Altera Quartus Prime | Gowin EDA |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The AGI 041 has about 4857% more logic capacity (2712K vs 54.7K LUT4 equivalents).
They use different logic architectures: the AGI 041 is built from ALMs and the GW2AN-55 from LUT4, so the raw LUT counts (1356K vs 54.7K) are not directly comparable.
The AGI 041 has more on-chip memory (335 Mb vs 2.5 Mb).
Only the AGI 041 has multi-gigabit transceivers (64 116 Gb/s).
The AGI 041 can include a hard Arm Cortex-A53 processor, while the GW2AN-55 does not.
The AGI 041 is designed with Altera Quartus Prime and the GW2AN-55 with Gowin EDA.
Full specifications
See the complete spec sheets with packages and grades: AGI 041 (Agilex 7 I-Series) and GW2AN-55 (Arora II).