GX 1100 vs XCVU3P
A comparison of the Altera Stratix 10 GX/SX GX 1100 and the AMD Virtex UltraScale+ XCVU3P using the data from both vendors' selection guides.
Side-by-side specifications
| GX 1100 | XCVU3P | |
|---|---|---|
| Vendor / family | Altera Stratix 10 GX/SX | AMD Virtex UltraScale+ |
| Logic (LUT4-equivalent) | 898,560 | 630,400 |
| LUTs as published | 449,280 ALMs | 394,000 LUT6 |
| Vendor logic figure | 1,325,000 LE | 862,000 SLC |
| DSP | 2,592 variable-precision DSP blocks | 2,280 DSP slices |
| Block RAM | 107 Mb | 25.3 Mb |
| Large RAM | — | 90 Mb |
| Max. user I/O | 688 | 520 |
| Transceivers | 32 × XCVR 28.3 Gb/s, 16 × XCVR 17.4 Gb/s | 40 × GTY 32.75 Gb/s |
| Hard PCI Express | Gen3 x16 | Gen3 x16 |
| Hard processor | None | None |
| Process | 14 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 1 | 0 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The GX 1100 has about 43% more logic capacity (899K vs 630K LUT4 equivalents).
They use different logic architectures: the GX 1100 is built from ALMs and the XCVU3P from LUT6, so the raw LUT counts (449K vs 394K) are not directly comparable.
For arithmetic, the GX 1100 has 2,592 variable-precision DSP blocks against 2,280 DSP slices on the XCVU3P.
Both have transceivers: 48 at up to 28.3 Gb/s on the GX 1100 and 40 at up to 32.75 Gb/s on the XCVU3P.
The GX 1100 is designed with Altera Quartus Prime and the XCVU3P with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: GX 1100 (Stratix 10 GX/SX) and XCVU3P (Virtex UltraScale+).