GX 2100 vs XCVU19P
A comparison of the Altera Stratix 10 GX/SX GX 2100 and the AMD Virtex UltraScale+ XCVU19P using the data from both vendors' selection guides.
Side-by-side specifications
| GX 2100 | XCVU19P | |
|---|---|---|
| Vendor / family | Altera Stratix 10 GX/SX | AMD Virtex UltraScale+ |
| Logic (LUT4-equivalent) | 1,359,360 | 6,537,600 |
| LUTs as published | 679,680 ALMs | 4,086,000 LUT6 |
| Vendor logic figure | 2,005,000 LE | 8,938,000 SLC |
| DSP | 3,744 variable-precision DSP blocks | 3,840 DSP slices |
| Block RAM | 127 Mb | 75.9 Mb |
| Large RAM | — | 90 Mb |
| Max. user I/O | 704 | 2,072 |
| Transceivers | 64 × XCVR 28.3 Gb/s, 32 × XCVR 17.4 Gb/s | 80 × GTY 32.75 Gb/s |
| Hard PCI Express | Gen3 x16 | Gen3 x16 |
| Hard processor | None | None |
| Process | 14 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 0 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The XCVU19P has about 381% more logic capacity (6538K vs 1359K LUT4 equivalents).
They use different logic architectures: the GX 2100 is built from ALMs and the XCVU19P from LUT6, so the raw LUT counts (680K vs 4086K) are not directly comparable.
For arithmetic, the XCVU19P has 3,840 DSP slices against 3,744 variable-precision DSP blocks on the GX 2100.
The XCVU19P has more on-chip memory (165.9 Mb vs 127 Mb).
Both have transceivers: 96 at up to 28.3 Gb/s on the GX 2100 and 80 at up to 32.75 Gb/s on the XCVU19P.
The GX 2100 is designed with Altera Quartus Prime and the XCVU19P with AMD Vivado.
Full specifications
See the complete spec sheets with packages and grades: GX 2100 (Stratix 10 GX/SX) and XCVU19P (Virtex UltraScale+).