FPGA & adaptive SoC databook · online editionRev. 2026.10

GX 650 vs XC2KU040P

A comparison of the Altera Stratix 10 GX/SX GX 650 and the AMD Kintex UltraScale+ Gen 2 XC2KU040P using the data from both vendors' selection guides.

Side-by-side specifications

GX 650XC2KU040P
Vendor / familyAltera Stratix 10 GX/SXAMD Kintex UltraScale+ Gen 2
Logic (LUT4-equivalent)414,720299,200
LUTs as published207,360 ALMs187,000 LUT6
Vendor logic figure612,000 LE410,000 SLC
DSP1,152 variable-precision DSP blocks1,560 DSP slices
Block RAM49 Mb14.8 Mb
Large RAM—22.5 Mb
Max. user I/O392474
Transceivers16 × XCVR 28.3 Gb/s, 8 × XCVR 17.4 Gb/s16 × GTY 32.75 Gb/s
Hard PCI ExpressGen3 x16Gen4 x8
Hard processorNoneNone
Process14 nm16 nm
Configuration memorySRAMSRAM
Packages12
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The GX 650 has about 39% more logic capacity (415K vs 299K LUT4 equivalents).

They use different logic architectures: the GX 650 is built from ALMs and the XC2KU040P from LUT6, so the raw LUT counts (207K vs 187K) are not directly comparable.

For arithmetic, the XC2KU040P has 1,560 DSP slices against 1,152 variable-precision DSP blocks on the GX 650.

The GX 650 has more on-chip memory (49 Mb vs 37.3 Mb).

Both have transceivers: 24 at up to 28.3 Gb/s on the GX 650 and 16 at up to 32.75 Gb/s on the XC2KU040P.

The GX 650 is designed with Altera Quartus Prime and the XC2KU040P with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: GX 650 (Stratix 10 GX/SX) and XC2KU040P (Kintex UltraScale+ Gen 2).