LFD2NX-35 vs LFMXO5-30TD
A comparison of the Lattice Certus-NX LFD2NX-35 and the Lattice MachXO5-NX LFMXO5-30TD using the data from both vendors' selection guides.
Side-by-side specifications
| LFD2NX-35 | LFMXO5-30TD | |
|---|---|---|
| Vendor / family | Lattice Certus-NX | Lattice MachXO5-NX |
| Logic (LUT4-equivalent) | 29,167 | 25,000 |
| LUTs as published | 29,167 LUT4 | 25,000 LUT4 |
| Vendor logic figure | 35,000 LC | 30,000 LC |
| DSP | 48 18×18 multipliers | 48 18×18 multipliers |
| Block RAM | 1.9 Mb | 0.8 Mb |
| Large RAM | 0.5 Mb | 0.5 Mb |
| Max. user I/O | 371 | 368 |
| Transceivers | 1 × SERDES 5 Gb/s | 1 × SERDES |
| Hard PCI Express | Gen2 | Gen2 |
| Hard processor | None | None |
| Process | 28 nm | 28 nm |
| Configuration memory | SRAM | Internal flash |
| Packages | 3 | 3 |
| Design tool | Lattice Radiant | Lattice Radiant |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The LFD2NX-35 has about 17% more logic capacity (29.2K vs 25K LUT4 equivalents).
The LFD2NX-35 has more on-chip memory (2.4 Mb vs 1.3 Mb).
Both have transceivers: 1 at up to 5 Gb/s on the LFD2NX-35 and 1 at up to 0 Gb/s on the LFMXO5-30TD.
Configuration memory: sram on the LFD2NX-35, internal flash on the LFMXO5-30TD.
The LFD2NX-35 is designed with Lattice Radiant and the LFMXO5-30TD with Lattice Radiant.
Full specifications
See the complete spec sheets with packages and grades: LFD2NX-35 (Certus-NX) and LFMXO5-30TD (MachXO5-NX).