FPGA & adaptive SoC databook · online editionRev. 2026.10

Ti165 vs XCZU3TEG

A comparison of the Efinix Titanium Ti165 and the AMD Zynq UltraScale+ MPSoC XCZU3TEG using the data from both vendors' selection guides.

Side-by-side specifications

Ti165XCZU3TEG
Vendor / familyEfinix TitaniumAMD Zynq UltraScale+ MPSoC
Logic (LUT4-equivalent)159,610115,200
LUTs as published159,610 LUT472,000 LUT6
Vendor logic figure162,800 LE157,000 SLC
DSP590 DSP blocks576 DSP slices
Block RAM12.1 Mb5.1 Mb
Large RAM—14 Mb
Max. user I/O337124
Transceivers16 × SERDES 16 Gb/s8 × GTH 16.3 Gb/s
Hard PCI ExpressGen4 x4Gen3 x8
Hard processor4× RISC-V RV324× Arm Cortex-A53
Process16 nm16 nm
Configuration memorySRAMSRAM
Packages52
Design toolEfinix EfinityAMD Vivado

Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.

Key differences

The Ti165 has about 39% more logic capacity (160K vs 115K LUT4 equivalents).

They use different logic architectures: the Ti165 is built from LUT4 and the XCZU3TEG from LUT6, so the raw LUT counts (160K vs 72K) are not directly comparable.

For arithmetic, the Ti165 has 590 DSP blocks against 576 DSP slices on the XCZU3TEG.

The XCZU3TEG has more on-chip memory (19.1 Mb vs 12.1 Mb).

Both have transceivers: 16 at up to 16 Gb/s on the Ti165 and 8 at up to 16.3 Gb/s on the XCZU3TEG.

The Ti165 is designed with Efinix Efinity and the XCZU3TEG with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: Ti165 (Titanium) and XCZU3TEG (Zynq UltraScale+ MPSoC).