10AX027 vs 5SGSD3
A comparison of the Altera Arria 10 10AX027 and the Altera Stratix V 5SGSD3 using the data from both vendors' selection guides.
Side-by-side specifications
| 10AX027 | 5SGSD3 | |
|---|---|---|
| Vendor / family | Altera Arria 10 | Altera Stratix V |
| LUTs as published | 101,620 ALMs | 89,000 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈203,240 | ≈178,000 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 354,000 LE | 236,000 LE |
| DSP | 830 variable-precision DSP blocks | 600 variable-precision DSP blocks |
| Block RAM | 14.7 Mb | 13.4 Mb |
| Large RAM | — | — |
| Max. user I/O | 384 | 432 |
| Transceivers | 24 × XCVR 17.4 Gb/s | 24 × GX 14.1 Gb/s |
| Hard PCI Express | Gen3 x8 | Gen3 |
| Hard processor | None | None |
| Process | 20 nm | 28 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The 10AX027 has about 14% more logic capacity (203K vs 178K LUT4 equivalents).
For arithmetic, the 10AX027 has 830 variable-precision DSP blocks against 600 variable-precision DSP blocks on the 5SGSD3.
Both have transceivers: 24 at up to 17.4 Gb/s on the 10AX027 and 24 at up to 14.1 Gb/s on the 5SGSD3.
The 10AX027 is designed with Altera Quartus Prime and the 5SGSD3 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: 10AX027 (Arria 10) and 5SGSD3 (Stratix V).