5AGXA1 vs XC7K70T
A comparison of the Altera Arria V 5AGXA1 and the AMD Kintex-7 XC7K70T using the data from both vendors' selection guides.
Side-by-side specifications
| 5AGXA1 | XC7K70T | |
|---|---|---|
| Vendor / family | Altera Arria V | AMD Kintex-7 |
| LUTs as published | 28,302 ALMs | 41,000 LUT6 |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 6-input look-up table, fracturable into two LUT5 with shared inputs |
| LUT4 equivalent (approx.) | ≈56,604 | ≈65,600 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 75,000 LE | 65,600 LC |
| DSP | 240 variable-precision DSP blocks | 240 DSP slices |
| Block RAM | 7.8 Mb | 4.7 Mb |
| Large RAM | — | — |
| Max. user I/O | 416 | 300 |
| Transceivers | 9 × XCVR 6.5536 Gb/s | 8 × GTX 12.5 Gb/s |
| Hard PCI Express | Gen2 x4 | Gen2 |
| Hard processor | None | None |
| Process | 28 nm | 28 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 2 |
| Design tool | Altera Quartus Prime | AMD Vivado |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The XC7K70T has about 16% more logic capacity (65.6K vs 56.6K LUT4 equivalents).
They use different logic architectures: the 5AGXA1 is built from ALMs and the XC7K70T from LUT6, so the raw LUT counts (28.3K vs 41K) are not directly comparable.
The 5AGXA1 has more on-chip memory (7.8 Mb vs 4.7 Mb).
Both have transceivers: 9 at up to 6.5536 Gb/s on the 5AGXA1 and 8 at up to 12.5 Gb/s on the XC7K70T.
The 5AGXA1 is designed with Altera Quartus Prime and the XC7K70T with AMD Vivado; open source: openXC7 (experimental) with Project X-Ray.
Full specifications
See the complete spec sheets with packages and grades: 5AGXA1 (Arria V) and XC7K70T (Kintex-7).