5AGXA7 vs EP2AGZ225
A comparison of the Altera Arria V 5AGXA7 and the Altera Arria II EP2AGZ225 using the data from both vendors' selection guides.
Side-by-side specifications
| 5AGXA7 | EP2AGZ225 | |
|---|---|---|
| Vendor / family | Altera Arria V | Altera Arria II |
| LUTs as published | 91,680 ALMs | 89,600 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈183,360 | ≈179,200 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 242,000 LE | 224,000 LE |
| DSP | 800 variable-precision DSP blocks | 800 18×18 multipliers |
| Block RAM | 13.3 Mb | 10.8 Mb |
| Large RAM | — | — |
| Max. user I/O | 544 | 734 |
| Transceivers | 24 × XCVR 6.5536 Gb/s | 24 × XCVR 6.375 Gb/s |
| Hard PCI Express | Gen2 x4 | Gen2 |
| Hard processor | None | None |
| Process | 28 nm | 40 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 183K and 179K LUT4 equivalents.
The 5AGXA7 has more on-chip memory (13.3 Mb vs 10.8 Mb).
Both have transceivers: 24 at up to 6.5536 Gb/s on the 5AGXA7 and 24 at up to 6.375 Gb/s on the EP2AGZ225.
The 5AGXA7 is designed with Altera Quartus Prime and the EP2AGZ225 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: 5AGXA7 (Arria V) and EP2AGZ225 (Arria II).