FPGA & adaptive SoC databook · online editionRev. 2026.10

5AGXA7 vs XC6VLX195T

A comparison of the Altera Arria V 5AGXA7 and the AMD Virtex-6 XC6VLX195T using the data from both vendors' selection guides.

Side-by-side specifications

5AGXA7XC6VLX195T
Vendor / familyAltera Arria VAMD Virtex-6
LUTs as published91,680 ALMs124,800 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈183,360≈199,680
CoreScore (SERV cores)——
Vendor logic figure242,000 LE199,680 LC
DSP800 variable-precision DSP blocks640 DSP48E1 slices
Block RAM13.3 Mb12.1 Mb
Large RAM——
Max. user I/O544600
Transceivers24 × XCVR 6.5536 Gb/s20 × GTX 6.6 Gb/s
Hard PCI ExpressGen2 x4Gen2 x8
Hard processorNoneNone
Process28 nm40 nm
Configuration memorySRAMSRAM
Packages32
Design toolAltera Quartus PrimeAMD ISE Design Suite

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The XC6VLX195T has about 9% more logic capacity (200K vs 183K LUT4 equivalents).

They use different logic architectures: the 5AGXA7 is built from ALMs and the XC6VLX195T from LUT6, so the raw LUT counts (91.7K vs 125K) are not directly comparable.

For arithmetic, the 5AGXA7 has 800 variable-precision DSP blocks against 640 DSP48E1 slices on the XC6VLX195T.

Both have transceivers: 24 at up to 6.5536 Gb/s on the 5AGXA7 and 20 at up to 6.6 Gb/s on the XC6VLX195T.

The 5AGXA7 is designed with Altera Quartus Prime and the XC6VLX195T with AMD ISE Design Suite.

Full specifications

See the complete spec sheets with packages and grades: 5AGXA7 (Arria V) and XC6VLX195T (Virtex-6).