FPGA & adaptive SoC databook · online editionRev. 2026.10

5AGZE5 vs XC6VSX315T

A comparison of the Altera Arria V 5AGZE5 and the AMD Virtex-6 XC6VSX315T using the data from both vendors' selection guides.

Side-by-side specifications

5AGZE5XC6VSX315T
Vendor / familyAltera Arria VAMD Virtex-6
LUTs as published150,960 ALMs196,800 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈301,920≈314,880
CoreScore (SERV cores)——
Vendor logic figure400,000 LE314,880 LC
DSP1,092 variable-precision DSP blocks1,344 DSP48E1 slices
Block RAM28.1 Mb24.8 Mb
Large RAM——
Max. user I/O674720
Transceivers36 × XCVR 12.5 Gb/s24 × GTX 6.6 Gb/s
Hard PCI ExpressGen3 x8Gen2 x8
Hard processorNoneNone
Process28 nm40 nm
Configuration memorySRAMSRAM
Packages22
Design toolAltera Quartus PrimeAMD ISE Design Suite

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 302K and 315K LUT4 equivalents.

They use different logic architectures: the 5AGZE5 is built from ALMs and the XC6VSX315T from LUT6, so the raw LUT counts (151K vs 197K) are not directly comparable.

For arithmetic, the XC6VSX315T has 1,344 DSP48E1 slices against 1,092 variable-precision DSP blocks on the 5AGZE5.

The 5AGZE5 has more on-chip memory (28.1 Mb vs 24.8 Mb).

Both have transceivers: 36 at up to 12.5 Gb/s on the 5AGZE5 and 24 at up to 6.6 Gb/s on the XC6VSX315T.

The 5AGZE5 is designed with Altera Quartus Prime and the XC6VSX315T with AMD ISE Design Suite.

Full specifications

See the complete spec sheets with packages and grades: 5AGZE5 (Arria V) and XC6VSX315T (Virtex-6).