5CGXC5 vs LFE3-70EA
A comparison of the Altera Cyclone V 5CGXC5 and the Lattice LatticeECP3 LFE3-70EA using the data from both vendors' selection guides.
Side-by-side specifications
| 5CGXC5 | LFE3-70EA | |
|---|---|---|
| Vendor / family | Altera Cyclone V | Lattice LatticeECP3 |
| LUTs as published | 29,080 ALMs | 67,000 LUT4 |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈58,160 | ≈67,000 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 77,000 LE | — |
| DSP | 150 variable-precision DSP blocks | 128 18×18 multipliers |
| Block RAM | 4.4 Mb | 4.3 Mb |
| Large RAM | — | — |
| Max. user I/O | 336 | 490 |
| Transceivers | 6 × XCVR 3.125 Gb/s | 12 × SERDES 3.2 Gb/s |
| Hard PCI Express | Gen1 | None |
| Hard processor | None | None |
| Process | 28 nm | 65 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 5 | 3 |
| Design tool | Altera Quartus Prime | Lattice Diamond |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The LFE3-70EA has about 15% more logic capacity (67K vs 58.2K LUT4 equivalents).
They use different logic architectures: the 5CGXC5 is built from ALMs and the LFE3-70EA from LUT4, so the raw LUT counts (29.1K vs 67K) are not directly comparable.
For arithmetic, the 5CGXC5 has 150 variable-precision DSP blocks against 128 18×18 multipliers on the LFE3-70EA.
Both have transceivers: 6 at up to 3.125 Gb/s on the 5CGXC5 and 12 at up to 3.2 Gb/s on the LFE3-70EA.
The 5CGXC5 is designed with Altera Quartus Prime; open source: Yosys + nextpnr-mistral (experimental) with Mistral and the LFE3-70EA with Lattice Diamond.
Full specifications
See the complete spec sheets with packages and grades: 5CGXC5 (Cyclone V) and LFE3-70EA (LatticeECP3).