5M1270Z vs LCMXO3L-1300
A comparison of the Altera MAX V 5M1270Z and the Lattice MachXO3 LCMXO3L-1300 using the data from both vendors' selection guides.
Side-by-side specifications
| 5M1270Z | LCMXO3L-1300 | |
|---|---|---|
| Vendor / family | Altera MAX V | Lattice MachXO3 |
| LUTs as published | 1,270 LUT4 | 1,300 LUT4 |
| LUT type | 4-input look-up table | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈1,270 | ≈1,300 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 1,270 LE | — |
| DSP | — nones | — 18×18 multipliers |
| Block RAM | — | 0.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 271 | 206 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 180 nm | — |
| Configuration memory | Internal flash | — |
| Packages | 3 | 6 |
| Design tool | Altera Quartus Prime | Lattice Diamond |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
Both devices offer similar logic capacity: 1.3K and 1.3K LUT4 equivalents.
Configuration memory: internal flash on the 5M1270Z, — on the LCMXO3L-1300.
The 5M1270Z is designed with Altera Quartus Prime and the LCMXO3L-1300 with Lattice Diamond.
Full specifications
See the complete spec sheets with packages and grades: 5M1270Z (MAX V) and LCMXO3L-1300 (MachXO3).