5SEEB vs LAV-AT-E70
A comparison of the Altera Stratix V 5SEEB and the Lattice Avant-E LAV-AT-E70 using the data from both vendors' selection guides.
Side-by-side specifications
| 5SEEB | LAV-AT-E70 | |
|---|---|---|
| Vendor / family | Altera Stratix V | Lattice Avant-E |
| LUTs as published | 359,200 ALMs | 397,000 LUT4 |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈718,400 | ≈397,000 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 952,000 LE | 637,000 LC |
| DSP | 352 variable-precision DSP blocks | 1,800 18×18 multipliers |
| Block RAM | 51.6 Mb | 35.6 Mb |
| Large RAM | — | — |
| Max. user I/O | 840 | 553 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 28 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 4 |
| Design tool | Altera Quartus Prime | Lattice Radiant |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The 5SEEB has about 81% more logic capacity (718K vs 397K LUT4 equivalents).
They use different logic architectures: the 5SEEB is built from ALMs and the LAV-AT-E70 from LUT4, so the raw LUT counts (359K vs 397K) are not directly comparable.
For arithmetic, the LAV-AT-E70 has 1,800 18×18 multipliers against 352 variable-precision DSP blocks on the 5SEEB.
The 5SEEB has more on-chip memory (51.6 Mb vs 35.6 Mb).
The 5SEEB is designed with Altera Quartus Prime and the LAV-AT-E70 with Lattice Radiant.
Full specifications
See the complete spec sheets with packages and grades: 5SEEB (Stratix V) and LAV-AT-E70 (Avant-E).