FPGA & adaptive SoC databook · online editionRev. 2026.10

5SGSD6 vs XC7VX415T

A comparison of the Altera Stratix V 5SGSD6 and the AMD Virtex-7 XC7VX415T using the data from both vendors' selection guides.

Side-by-side specifications

5SGSD6XC7VX415T
Vendor / familyAltera Stratix VAMD Virtex-7
LUTs as published220,000 ALMs257,600 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈440,000≈412,160
CoreScore (SERV cores)——
Vendor logic figure583,000 LE412,160 LC
DSP1,775 variable-precision DSP blocks2,160 DSP slices
Block RAM45.3 Mb30.9 Mb
Large RAM——
Max. user I/O840600
Transceivers48 × GX 14.1 Gb/s48 × GTH 13.1 Gb/s
Hard PCI ExpressGen3Gen3
Hard processorNoneNone
Process28 nm28 nm
Configuration memorySRAMSRAM
Packages23
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 440K and 412K LUT4 equivalents.

They use different logic architectures: the 5SGSD6 is built from ALMs and the XC7VX415T from LUT6, so the raw LUT counts (220K vs 258K) are not directly comparable.

For arithmetic, the XC7VX415T has 2,160 DSP slices against 1,775 variable-precision DSP blocks on the 5SGSD6.

The 5SGSD6 has more on-chip memory (45.3 Mb vs 30.9 Mb).

Both have transceivers: 48 at up to 14.1 Gb/s on the 5SGSD6 and 48 at up to 13.1 Gb/s on the XC7VX415T.

The 5SGSD6 is designed with Altera Quartus Prime and the XC7VX415T with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: 5SGSD6 (Stratix V) and XC7VX415T (Virtex-7).