FPGA & adaptive SoC databook · online editionRev. 2026.10

A27F008 vs XCVM2152

A comparison of the Altera Agilex 27 A27F008 and the AMD Versal Prime XCVM2152 using the data from both vendors' selection guides.

Side-by-side specifications

A27F008XCVM2152
Vendor / familyAltera Agilex 27AMD Versal Prime
LUTs as published274,190 ALMs346,112 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈548,380≈553,779
CoreScore (SERV cores)——
Vendor logic figure866,000 LE757,000 SLC
DSP1,096 AI Tensor DSP blocks1,704 DSP Engines
Block RAM40 Mb27 Mb
Large RAM63 Mb54 Mb
Max. user I/O312428
Transceivers16 × GX 128 Gb/s8 × GTYP 32.75 Gb/s, 8 × GTM 58 Gb/s
Hard PCI ExpressGen6 x8Gen5 x4
Hard processor4× Arm Cortex-A720 + Cortex-A520 (optional)2× Arm Cortex-A72
Process—7 nm
Configuration memorySRAMSRAM
Packages32
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 548K and 554K LUT4 equivalents.

They use different logic architectures: the A27F008 is built from ALMs and the XCVM2152 from LUT6, so the raw LUT counts (274K vs 346K) are not directly comparable.

For arithmetic, the XCVM2152 has 1,704 DSP Engines against 1,096 AI Tensor DSP blocks on the A27F008.

The A27F008 has more on-chip memory (103 Mb vs 81 Mb).

Both have transceivers: 16 at up to 128 Gb/s on the A27F008 and 16 at up to 58 Gb/s on the XCVM2152.

The A27F008 is designed with Altera Quartus Prime and the XCVM2152 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: A27F008 (Agilex 27) and XCVM2152 (Versal Prime).