FPGA & adaptive SoC databook · online editionRev. 2026.10

A27F018 vs XCVM2302

A comparison of the Altera Agilex 27 A27F018 and the AMD Versal Prime XCVM2302 using the data from both vendors' selection guides.

Side-by-side specifications

A27F018XCVM2302
Vendor / familyAltera Agilex 27AMD Versal Prime
LUTs as published602,784 ALMs719,872 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈1,205,568≈1,151,795
CoreScore (SERV cores)——
Vendor logic figure1,800,000 LE1,575,000 SLC
DSP2,208 AI Tensor DSP blocks1,904 DSP Engines
Block RAM86 Mb49 Mb
Large RAM115 Mb127 Mb
Max. user I/O325324
Transceivers16 × GX 128 Gb/s, 16 × GS 32 Gb/s8 × GTYP 32.75 Gb/s, 36 × GTM 58 Gb/s
Hard PCI ExpressGen6 x8Gen5 x4
Hard processor4× Arm Cortex-A720 + Cortex-A520 (optional)2× Arm Cortex-A72
Process—7 nm
Configuration memorySRAMSRAM
Packages41
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

Both devices offer similar logic capacity: 1206K and 1152K LUT4 equivalents.

They use different logic architectures: the A27F018 is built from ALMs and the XCVM2302 from LUT6, so the raw LUT counts (603K vs 720K) are not directly comparable.

For arithmetic, the A27F018 has 2,208 AI Tensor DSP blocks against 1,904 DSP Engines on the XCVM2302.

The A27F018 has more on-chip memory (201 Mb vs 176 Mb).

Both have transceivers: 32 at up to 128 Gb/s on the A27F018 and 44 at up to 58 Gb/s on the XCVM2302.

The A27F018 is designed with Altera Quartus Prime and the XCVM2302 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: A27F018 (Agilex 27) and XCVM2302 (Versal Prime).