FPGA & adaptive SoC databook · online editionRev. 2026.10

A27F018 vs XCVP1052

A comparison of the Altera Agilex 27 A27F018 and the AMD Versal Premium XCVP1052 using the data from both vendors' selection guides.

Side-by-side specifications

A27F018XCVP1052
Vendor / familyAltera Agilex 27AMD Versal Premium
LUTs as published602,784 ALMs542,080 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈1,205,568≈867,328
CoreScore (SERV cores)——
Vendor logic figure1,800,000 LE1,186,000 SLC
DSP2,208 AI Tensor DSP blocks1,572 DSP Engines
Block RAM86 Mb26 Mb
Large RAM115 Mb138 Mb
Max. user I/O325324
Transceivers16 × GX 128 Gb/s, 16 × GS 32 Gb/s8 × GTY 32.75 Gb/s, 36 × GTM 58 Gb/s
Hard PCI ExpressGen6 x8Gen4 x4, Gen4 x8
Hard processor4× Arm Cortex-A720 + Cortex-A520 (optional)2× Arm Cortex-A72
Process—7 nm
Configuration memorySRAMSRAM
Packages43
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The A27F018 has about 39% more logic capacity (1206K vs 867K LUT4 equivalents).

They use different logic architectures: the A27F018 is built from ALMs and the XCVP1052 from LUT6, so the raw LUT counts (603K vs 542K) are not directly comparable.

For arithmetic, the A27F018 has 2,208 AI Tensor DSP blocks against 1,572 DSP Engines on the XCVP1052.

The A27F018 has more on-chip memory (201 Mb vs 164 Mb).

Both have transceivers: 32 at up to 128 Gb/s on the A27F018 and 44 at up to 58 Gb/s on the XCVP1052.

The A27F018 is designed with Altera Quartus Prime and the XCVP1052 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: A27F018 (Agilex 27) and XCVP1052 (Versal Premium).