FPGA & adaptive SoC databook · online editionRev. 2026.10

A27F031 vs XCVP1202

A comparison of the Altera Agilex 27 A27F031 and the AMD Versal Premium XCVP1202 using the data from both vendors' selection guides.

Side-by-side specifications

A27F031XCVP1202
Vendor / familyAltera Agilex 27AMD Versal Premium
LUTs as published1,002,432 ALMs900,224 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈2,004,864≈1,440,358
CoreScore (SERV cores)——
Vendor logic figure3,100,000 LE1,969,000 SLC
DSP3,864 AI Tensor DSP blocks3,984 DSP Engines
Block RAM151 Mb47 Mb
Large RAM201 Mb190 Mb
Max. user I/O715702
Transceivers48 × GX 128 Gb/s28 × GTYP 32.75 Gb/s, 20 × GTM 58 Gb/s
Hard PCI ExpressGen6 x8Gen5 x8, Gen5 x4
Hard processor4× Arm Cortex-A720 + Cortex-A520 (optional)2× Arm Cortex-A72
Process—7 nm
Configuration memorySRAMSRAM
Packages31
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The A27F031 has about 39% more logic capacity (2005K vs 1440K LUT4 equivalents).

They use different logic architectures: the A27F031 is built from ALMs and the XCVP1202 from LUT6, so the raw LUT counts (1002K vs 900K) are not directly comparable.

For arithmetic, the XCVP1202 has 3,984 DSP Engines against 3,864 AI Tensor DSP blocks on the A27F031.

The A27F031 has more on-chip memory (352 Mb vs 237 Mb).

Both have transceivers: 48 at up to 128 Gb/s on the A27F031 and 48 at up to 58 Gb/s on the XCVP1202.

The A27F031 is designed with Altera Quartus Prime and the XCVP1202 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: A27F031 (Agilex 27) and XCVP1202 (Versal Premium).