AGI 022 vs TX 2800
A comparison of the Altera Agilex 7 I-Series AGI 022 and the Altera Stratix 10 TX TX 2800 using the data from both vendors' selection guides.
Side-by-side specifications
| AGI 022 | TX 2800 | |
|---|---|---|
| Vendor / family | Altera Agilex 7 I-Series | Altera Stratix 10 TX |
| LUTs as published | 748,500 ALMs | 933,120 ALMs |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) |
| LUT4 equivalent (approx.) | ≈1,497,000 | ≈1,866,240 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 2,208,075 LE | 2,753,000 LE |
| DSP | 6,250 variable-precision DSP blocks | 5,760 variable-precision DSP blocks |
| Block RAM | 212 Mb | 229 Mb |
| Large RAM | — | — |
| Max. user I/O | 720 | 440 |
| Transceivers | 64 × XCVR 116 Gb/s | 120 × GXE 57.8 Gb/s, 16 × GXT 28.3 Gb/s, 8 × GX 17.4 Gb/s |
| Hard PCI Express | None | Gen3 x16 |
| Hard processor | 4× Arm Cortex-A53 (optional) | 4× Arm Cortex-A53 (optional) |
| Process | Intel 7 | 14 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 2 |
| Design tool | Altera Quartus Prime | Altera Quartus Prime |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The TX 2800 has about 25% more logic capacity (1866K vs 1497K LUT4 equivalents).
For arithmetic, the AGI 022 has 6,250 variable-precision DSP blocks against 5,760 variable-precision DSP blocks on the TX 2800.
Both have transceivers: 64 at up to 116 Gb/s on the AGI 022 and 144 at up to 57.8 Gb/s on the TX 2800.
The AGI 022 is designed with Altera Quartus Prime and the TX 2800 with Altera Quartus Prime.
Full specifications
See the complete spec sheets with packages and grades: AGI 022 (Agilex 7 I-Series) and TX 2800 (Stratix 10 TX).