FPGA & adaptive SoC databook · online editionRev. 2026.10

AGI 023 vs XCVP1102

A comparison of the Altera Agilex 7 I-Series AGI 023 and the AMD Versal Premium XCVP1102 using the data from both vendors' selection guides.

Side-by-side specifications

AGI 023XCVP1102
Vendor / familyAltera Agilex 7 I-SeriesAMD Versal Premium
LUTs as published782,400 ALMs719,872 LUT6
LUT typeadaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions)6-input look-up table, fracturable into two LUT5 with shared inputs
LUT4 equivalent (approx.)≈1,564,800≈1,151,795
CoreScore (SERV cores)——
Vendor logic figure2,308,080 LE1,575,000 SLC
DSP1,640 variable-precision DSP blocks1,904 DSP Engines
Block RAM204 Mb49 Mb
Large RAM—127 Mb
Max. user I/O480486
Transceivers64 × XCVR 116 Gb/s8 × GTYP 32.75 Gb/s, 64 × GTM 58 Gb/s
Hard PCI ExpressNoneGen5 x4
Hard processor4× Arm Cortex-A53 (optional)2× Arm Cortex-A72
ProcessIntel 77 nm
Configuration memorySRAMSRAM
Packages22
Design toolAltera Quartus PrimeAMD Vivado

Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.

Key differences

The AGI 023 has about 36% more logic capacity (1565K vs 1152K LUT4 equivalents).

They use different logic architectures: the AGI 023 is built from ALMs and the XCVP1102 from LUT6, so the raw LUT counts (782K vs 720K) are not directly comparable.

For arithmetic, the XCVP1102 has 1,904 DSP Engines against 1,640 variable-precision DSP blocks on the AGI 023.

The AGI 023 has more on-chip memory (204 Mb vs 176 Mb).

Both have transceivers: 64 at up to 116 Gb/s on the AGI 023 and 72 at up to 58 Gb/s on the XCVP1102.

The AGI 023 is designed with Altera Quartus Prime and the XCVP1102 with AMD Vivado.

Full specifications

See the complete spec sheets with packages and grades: AGI 023 (Agilex 7 I-Series) and XCVP1102 (Versal Premium).