EP4SE360 vs Ti180
A comparison of the Altera Stratix IV EP4SE360 and the Efinix Titanium Ti180 using the data from both vendors' selection guides.
Side-by-side specifications
| EP4SE360 | Ti180 | |
|---|---|---|
| Vendor / family | Altera Stratix IV | Efinix Titanium |
| LUTs as published | 141,440 ALMs | 172,800 LUT4 |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 4-input look-up table |
| LUT4 equivalent (approx.) | ≈282,880 | ≈172,800 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 354,000 LE | 176,256 LE |
| DSP | 1,040 18×18 multipliers | 640 DSP blocks |
| Block RAM | 17.7 Mb | 13.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 736 | 284 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 40 nm | 16 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 2 | 5 |
| Design tool | Altera Quartus Prime | Efinix Efinity |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The EP4SE360 has about 64% more logic capacity (283K vs 173K LUT4 equivalents).
They use different logic architectures: the EP4SE360 is built from ALMs and the Ti180 from LUT4, so the raw LUT counts (141K vs 173K) are not directly comparable.
For arithmetic, the EP4SE360 has 1,040 18×18 multipliers against 640 DSP blocks on the Ti180.
The EP4SE360 has more on-chip memory (17.7 Mb vs 13.1 Mb).
The EP4SE360 is designed with Altera Quartus Prime and the Ti180 with Efinix Efinity.
Full specifications
See the complete spec sheets with packages and grades: EP4SE360 (Stratix IV) and Ti180 (Titanium).