EP4SE530 vs XC6VLX760
A comparison of the Altera Stratix IV EP4SE530 and the AMD Virtex-6 XC6VLX760 using the data from both vendors' selection guides.
Side-by-side specifications
| EP4SE530 | XC6VLX760 | |
|---|---|---|
| Vendor / family | Altera Stratix IV | AMD Virtex-6 |
| LUTs as published | 212,480 ALMs | 474,240 LUT6 |
| LUT type | adaptive logic module: fracturable 8-input LUT (one 6-input or two independent 4-input functions) | 6-input look-up table, fracturable into two LUT5 with shared inputs |
| LUT4 equivalent (approx.) | ≈424,960 | ≈758,784 |
| CoreScore (SERV cores) | — | — |
| Vendor logic figure | 531,000 LE | 758,784 LC |
| DSP | 1,024 18×18 multipliers | 864 DSP48E1 slices |
| Block RAM | 20.2 Mb | 25.3 Mb |
| Large RAM | — | — |
| Max. user I/O | 960 | 1,200 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 40 nm | 40 nm |
| Configuration memory | SRAM | SRAM |
| Packages | 3 | 1 |
| Design tool | Altera Quartus Prime | AMD ISE Design Suite |
Highlighted values are higher. LUT counts are shown as published; the LUT4 equivalent is an approximation to compare different LUT types, see how FPGA vendors count logic. Add up to two more devices to this comparison.
Key differences
The XC6VLX760 has about 79% more logic capacity (759K vs 425K LUT4 equivalents).
They use different logic architectures: the EP4SE530 is built from ALMs and the XC6VLX760 from LUT6, so the raw LUT counts (212K vs 474K) are not directly comparable.
For arithmetic, the EP4SE530 has 1,024 18×18 multipliers against 864 DSP48E1 slices on the XC6VLX760.
The XC6VLX760 has more on-chip memory (25.3 Mb vs 20.2 Mb).
The EP4SE530 is designed with Altera Quartus Prime and the XC6VLX760 with AMD ISE Design Suite.
Full specifications
See the complete spec sheets with packages and grades: EP4SE530 (Stratix IV) and XC6VLX760 (Virtex-6).