GW1AN-1 vs LFMXO4-010
A comparison of the Gowin Arora GW1AN-1 and the Lattice MachXO4 LFMXO4-010 using the data from both vendors' selection guides.
Side-by-side specifications
| GW1AN-1 | LFMXO4-010 | |
|---|---|---|
| Vendor / family | Gowin Arora | Lattice MachXO4 |
| Logic (LUT4-equivalent) | 1,152 | 896 |
| LUTs as published | 1,152 LUT4 | 896 LUT4 |
| Vendor logic figure | — LC | 1,100 LC |
| DSP | — 18×18 multipliers | — 18×18 multipliers |
| Block RAM | 0.1 Mb | 0.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 120 | 105 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 55 nm | — |
| Configuration memory | Embedded flash | Internal flash |
| Packages | 1 | 3 |
| Design tool | Gowin EDA | Lattice Radiant |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
The GW1AN-1 has about 29% more logic capacity (1.2K vs 896 LUT4 equivalents).
The GW1AN-1 has more on-chip memory (0.1 Mb vs 0.1 Mb).
Configuration memory: embedded flash on the GW1AN-1, internal flash on the LFMXO4-010.
The GW1AN-1 is designed with Gowin EDA and the LFMXO4-010 with Lattice Radiant.
Full specifications
See the complete spec sheets with packages and grades: GW1AN-1 (Arora) and LFMXO4-010 (MachXO4).