GW1AN-1S vs GW1NZ-1
A comparison of the Gowin Arora GW1AN-1S and the Gowin LittleBee GW1NZ-1 using the data from both vendors' selection guides.
Side-by-side specifications
| GW1AN-1S | GW1NZ-1 | |
|---|---|---|
| Vendor / family | Gowin Arora | Gowin LittleBee |
| Logic (LUT4-equivalent) | 1,152 | 1,152 |
| LUTs as published | 1,152 LUT4 | 1,152 LUT4 |
| Vendor logic figure | — LC | — LC |
| DSP | — 18×18 multipliers | — 18×18 multipliers |
| Block RAM | 0.1 Mb | 0.1 Mb |
| Large RAM | — | — |
| Max. user I/O | 44 | 48 |
| Transceivers | None | None |
| Hard PCI Express | None | None |
| Hard processor | None | None |
| Process | 55 nm | 55 nm |
| Configuration memory | Embedded flash | Embedded flash |
| Packages | 2 | 6 |
| Design tool | Gowin EDA | Gowin EDA |
Highlighted values are higher. Logic is compared in LUT4 equivalents; see how FPGA vendors count logic.
Key differences
Both devices offer similar logic capacity: 1.2K and 1.2K LUT4 equivalents.
The GW1AN-1S is designed with Gowin EDA and the GW1NZ-1 with Gowin EDA.
Full specifications
See the complete spec sheets with packages and grades: GW1AN-1S (Arora) and GW1NZ-1 (LittleBee).